The Datacard 450 Embosser is designed for high volume use (several hundred cards per run; however, can be used on low volume runs) where data is input through your PC computer. The DC 450 input hopper allows for about 200 cards to be automatically fed into the embosser. Fonts include OCR number characters spaced at 7 characters per inch and alphanumeric characters spaced at 10 characters per inch. These look like the characters on traditional credit cards. Color tipping of the embossed characters and/or encoding of a magnetic stripe are options that may be included on the Datacard 450 Embosser. These would be automatically done during the card's movement through the embosser so that a complete card would be produced during one cycle of the embosser. Options to Configure: Magnetic Stripe Encoding HiCo-LoCo 3 Track, Color Topping, Rear Indent.
The Datacard 275/295 Embossers are designed for medium volume use where data is input through your PC computer or through a keyboard for stand-alone use. The 275/295 input hopper allows for a stack of cards to be automatically fed into the embosser. Fonts include OCR number characters spaced at 7 characters per inch and alphanumeric characters spaced at 10 characters per inch. These look like the characters on traditional credit cards. Color Topping of the embossed characters and Magnetic Stripe Encoding are options on the 295. The 275 is ideal for hospital patient ID cards. Options to Configure: Magnetic Stripe Encoding HiCo/LoCo 3 Track, Color Topping, Rear Indent.
The Datacard 280P Embosser w/Topping and Encoding is designed for medium volume use where data is input through your PC computer or through a keyboard for stand-alone use. The 280P input hopper allows for a stack of cards to be automatically fed into the embosser. Fonts include OCR number characters spaced at 7 characters per inch and alphanumeric characters spaced at 10 characters per inch. These look like the characters on traditional credit cards. Color Topping of the embossed characters and Magnetic Stripe Encoding are options. Options to Configure: Magnetic Stripe Encoding HiCo/LoCo 3 Track, Color Topping, Rear Indent.
The Datacard 150i Embosser is designed for low volume financial card format use where data is input through your PC computer; however, an operator keystroke is required to start each card. The 150i embosses one card at a time which is loaded automatically. Fonts include OCR number characters spaced at 7 characters per inch and alphanumeric characters spaced at 10 characters per inch. These look like the characters on traditional credit cards. Color tipping of the embossed characters and Hi coercivity/Lo coercivity encoding of a magnetic stripe are included. Locking cover for security. Options to Configure: Magnetic Stripe Encoding HiCo/LoCo 3 Track, Color Topping, Front or Rear Indent.
The CCS-200 Manual Embosser is designed for low volume use where data may be input by turning the character wheel on top to the character desired. Then the character is embossed by pulling the handle on the right side of the CCS-200. The automatic advance moves the card to the next position for another character. The CCS-200 embosses one card at a time which is loaded manually. Characters look like those on traditional credit cards. Color tipping of the embossed characters and/or encoding of a magnetic stripe must be done on separate equipment.
The Datacard UG800 Thermal Printer is designed for use where data is input through a PC computer. Thermal printing is similar in appearance to a laser printer's printing on paper. The UG800 thermal prints each plastic card with a variety of standard fonts. An optional font conversion program is available to allow the use of additional TrueType font sets. With the ability to print text, logos and barcodes, you can design very attractive and functional plastic cards for you and your customers. Options to Configure: Magnetic Stripe Encoding HiCo/LoCo 3 Track.
The Matica S6000 Series Systems are designed for mid-volume use (several thousand cards per run) where data is input through a PC computer controller. The S6000 Series input hopper allows for cards to be automatically fed into the system. Color tipping of the embossed characters, encoding of the magnetic stripe and thermal printing of text, barcodes and logos are available on the Matica S6000 Series Systems. These would be automatically done during the card's movement through the system so that a complete card would be produced during one cycle of the system. Also available are Smartcard modules, photo ID modules and many other features. Options to Configure: Magnetic Stripe Encoding - HiCo/LoCo 3 Track, Monochrome & Color Printing Module - 300dpi, Flip-over Station, Contact Chip Encoding, Contactless Chip Encoding, Integrated Cleaning System, Embossing, Front or Rear Indent, Color Topping, Floor Cabinet w/Lockable Doors, Maticard Pro Software.
The Matica S5000 Series Systems are designed for mid-volume use (several thousand cards per run) where data is input through a PC computer controller. The S5000 Series input hopper allows for cards to be automatically fed into the system. Depending on which system the S5000E, S5000G, S5000L or the S5000C you choose, the unit can be configured to perform some of these functions. Color tipping of the embossed characters, encoding of the magnetic stripe, thermal printing of text, barcodes and logos, Smart Card encoding and Laser engraving are available on the Matica S5000 Series Systems. These would be automatically done during the card's movement through the system so that a complete card would be produced during one cycle of the system. Options to Configure: Magnetic Stripe Encoding - HiCo/LoCo 3 Track, Monochrome & Color Printing Module - 300dpi, Flip-over Station, Contact Chip Encoding, Contactless Chip Encoding, Integrated Cleaning System, Embossing, Front or Rear Indent, Color Topping, Floor Cabinet w/Lockable Doors, Maticard Pro Software.